Len found a cheap $150 MiniFish (Alcort's mini version of the Sunfish) which at 11'6" (actually Len found it was only 11'3" when you didn't count the deck flange) made the Classic Moth conversion a simple transomectomy (he cut the transom off and installed one at the correct 11 foot length).
Len married the converted MiniFish hull with a cheap aluminum Windsurfing mast, to which he added stays and an used Classic Moth marconi sail..........everything else remained as it was on the MiniFish.
Len brought the now named Fishboat "Fish and Chips" to the 2010 Nationals. Unfortunately he had a surgical procedure on his leg open up on the first race (with E-City having had a huge sewerage spill upriver three days before the Nationals, Len wisely opted to abandon racing). George Albaugh had his vintage Dorr Willey similarly open up (cracked plank) on the first race so the switch was made; with George driving "Fish and Chips" the rest of the regatta.
"Fish and Chips" made a very credible showing. George had some very tight racing with the Gen1 folks and it seemed to me the Classic Moth/MiniFish version was a big improvement over the original lateen sailplan.
I took a spin in "Fish and Chips" after the racing and was impressed. It is a small boat (I think it only has 3'9" beam) so if you're pushing 200 lbs, you wouldn't be Fishboat material.... I think 150 lbs (70 kg) crew weight would be ideal. The low freeboard would be very wet in any significant chop so definitely keep this Fishboat on flat water.
Tip of the hat to Len on a very workable Frankenboat......
George reaching in "Fish and Chips".
George standing in "Fish and Chips".
"Fish and Chips" fighting for inside with Ed Salva
at the leeward mark.
Len, feel free to add any other observations on the conversion and sailing of "Fish and Chips" to the comments.
Pics by Elizabeth Albaugh and Len Parker
(I'm bringing Len's comment back into the main post so he can correct some of my errors.)
"Hi Rod , This turned out to be straight forward project on what I guess is the world's simplest sailing dinghy.It kept me almost sane while I was injured earlier this year and couldn't sail ( or surf ). It actually only cost $100 and the aluminum mast came free with some broken carbon windsurf masts I picked up.I kept it as cheap as possible and some of the fittings were originally intended for another Moth project.On the ply transom I used the original Minifish/Sunfish gudgeon bracket & rudderhead.I added a travel track in front of the cockpit , mid-boom mainsheet with a ratchet block & added dual controls for the outhaul , vang & Cunningham. The only sail control the original Minifish had was the mainsheet , which could be fed under a nasty looking brass hook in the cockpit. I figured I'd lose some knee flesh on that thing , so I removed it. Turns out I didn't need a hook to lose some knee flesh ! ... I used a Sunfish daggerboard and a broken carbon windsurf mast as a boom , with plastic awning /sail track & a recut Europe sail.It hadn't rained here in 4 months until I moved the hull outside and I forgot to screw the inspection port lids in , and typically it poured it down all night and the hull foam soaked plenty of water up , adding considerable weight which still hasn't completely gone.The first time it hit the water was at the Nationals , and I didn't last very long ! George and your good self would be better judges of performance and things that need tweaking , but it was fun to convert and sail , and it lasted longer than I did ... Cheers , Len"
1 comment:
Hi Rod , This turned out to be straight forward project on what I guess is the world's simplest sailing dinghy.It kept me almost sane while I was injured earlier this year and couldn't sail ( or surf ). It actually only cost $100 and the aluminum mast came free with some broken carbon windsurf masts I picked up.I kept it as cheap as possible and some of the fittings were originally intended for another Moth project.On the ply transom I used the original Minifish/Sunfish gudgeon bracket & rudderhead.I added a travel track in front of the cockpit , mid-boom mainsheet with a ratchet block & added dual controls for the outhaul , vang & Cunningham. The only sail control the original Minifish had was the mainsheet , which could be fed under a nasty looking brass hook in the cockpit. I figured I'd lose some knee flesh on that thing , so I removed it. Turns out I didn't need a hook to lose some knee flesh ! ... I used a Sunfish daggerboard and a broken carbon windsurf mast as a boom , with plastic awning /sail track & a recut Europe sail.It hadn't rained here in 4 months until I moved the hull outside and I forgot to screw the inspection port lids in , and typically it poured it down all night and the hull foam soaked plenty of water up , adding considerable weight which still hasn't completely gone.The first time it hit the water was at the Nationals , and I didn't last very long ! George and your good self would be better judges of performance and things that need tweaking , but it was fun to convert and sail , and it lasted longer than I did ... Cheers , Len
Post a Comment