Sunday, February 10, 2019

The "Punch" Dinghy design for the 1960's IYRU Singlehaded trials

While I am in the midst of covering some of the European Moth design history, mention must also be made of the entry of a Moth type, designed by Mothists Dunand and FragniƩre, in the IYRU singlehander trials of the late 1960's. (Three sets of trials, three different locations, Weymouth, England 1965; La Baule, France 1967; and Medemblik, Holland 1968, with the eventual winner being the Contender.) She was called Punch and it appears that she was initially designed by B. Dunand and then the project was taken over by FragniƩre for the last set of trials. Punch showed up at the second trials in La Baule and, with her low wetted surface, was the fastest over twenty three entrants in a light air regatta.

Looking at the sections of Punch, as she is turned over on the beach at La Baule, it appears she wasn't an extreme-V hull but rather a semi-circular hull. (The IYRU had initially specified the sliding seat as the only permisable hiking out aid, but allowed trapezes after Elvstrom showed up at the first set of trials with his Trapez singlehander. Still most competitors stayed with the sliding seat - with the exception of the Contender.)

Yachts and Yachting, September 29, 1967


For the last set of trials at Medemblik, surprisingly, Punch was well off the pace. Punch was hamstrung by a very high hull weight. The IYRU had specified hull weight based on sectional shape (a sort of scantlings restriction); the wider, deeper shape of Punch had to weigh more than the narrower, lower freeboard type such as the Contender. Three competitors, the Unit, the Jeton, and Punch at the weather mark at Medemblik:

Yachts and Yachting, June 7, 1968

Hubert Raudaschl, a Finn sailor, designed Jeton, which, in the last set of IYRU trials of 1968, took over the round hull-shape, low-wetted design mantle from Punch and finished second to the Contender. Below is a photo of Jeton at La Baule. She sported these weird set of folding seats that stored flush to the aft deck and individually swung out when needed. It was a feature that definitely would have needed to be changed out if she had been selected. In 1970, the Jeton hull was flattened out and re-purposed as a two man, main, jib, spinnaker dinghy.



2 comments:

Dieharddinghysailor said...

I'm always fascinated at the stories of the Single-handed trials from the 60's, some interesting designs appeared, most of which never made the grade. It would be good to see a head-to-head of current singlehanders in preparation for th Finn replacement at the Olympics.
BTW your current Header - is that a Gwen 12? You probably know that Iain Oughtred was a Gwen Nat champion back in the day....!

Tweezerman said...

Mike,

Yes that is a Gwen 12. Got some photos from the ICWDR in Australia and will put a post up at some point. Some Aussies are getting this vintage dinghy design out on the water. Ian and the Gwen 12 are featured in the following post.